Steps To Mount A CD/MP3 Player Easily
If your car still has the cassette player than you feel very annoyed to repeat the track each time where you can to rewind, stop, play in a cassette player its highly recommended that switch over to an-in dash CD player using this tips on how to install an-in dash CD player. The CD player can be installed in the dash board by replacing the cassette player. But one has to ensure that he has an idea of the automobile make and its model so that the installed CD player is fit as in stock model.
Here is the list of the things that you will need for completing the switch over; wire strippers, car stereo wiring connectors, 20 vinyl butt splices that are insulated awg 16-14, needle nose or combination pliers and 1 CD player dash install kit.
The first step in the process is to find the things we must need to complete the task. Few things are very essential to build up a dash player kit and they are around twenty pieces of butt splices. They must have insulations done and wire strippers are must as during installation the pliers and strippers play a very important role. Lastly the most important is the wire which connects the stereo.
Now you will have to use both the orange as well as the insulated splice and connect them from the wire connector of the stereo.
In the next step in the process we should remove the insulation from all the wires that comes from the wiring connector for car stereo. The insulation should be removed for about 1/8 to quarter inches and here also care should be taken so as to avoid the damage caused to the internal wiring.
There will be a vacant space available just to the back side of the CD player. Use this to place the remaining wires securely. Now place the disk player and the dash installation kit inside the automobile. Now to keep the CD player secure, screw the dash installation kit to the automobile using the same holes left by removing the old cassette player.
After that, he car stereo player along with its wiring connector are placed on the dashboard and are adjusted so that it completely rests within the space provided and should also be properly fit. Now the Car stereo wiring connector and the wire connector of the vehicle are to be properly linked this can be checked with the click sound produced by the connectors when they are linked.
One can modernize the car by knowing how to install an in - dash CD player, and these steps helps to know it. - 2368
Here is the list of the things that you will need for completing the switch over; wire strippers, car stereo wiring connectors, 20 vinyl butt splices that are insulated awg 16-14, needle nose or combination pliers and 1 CD player dash install kit.
The first step in the process is to find the things we must need to complete the task. Few things are very essential to build up a dash player kit and they are around twenty pieces of butt splices. They must have insulations done and wire strippers are must as during installation the pliers and strippers play a very important role. Lastly the most important is the wire which connects the stereo.
Now you will have to use both the orange as well as the insulated splice and connect them from the wire connector of the stereo.
In the next step in the process we should remove the insulation from all the wires that comes from the wiring connector for car stereo. The insulation should be removed for about 1/8 to quarter inches and here also care should be taken so as to avoid the damage caused to the internal wiring.
There will be a vacant space available just to the back side of the CD player. Use this to place the remaining wires securely. Now place the disk player and the dash installation kit inside the automobile. Now to keep the CD player secure, screw the dash installation kit to the automobile using the same holes left by removing the old cassette player.
After that, he car stereo player along with its wiring connector are placed on the dashboard and are adjusted so that it completely rests within the space provided and should also be properly fit. Now the Car stereo wiring connector and the wire connector of the vehicle are to be properly linked this can be checked with the click sound produced by the connectors when they are linked.
One can modernize the car by knowing how to install an in - dash CD player, and these steps helps to know it. - 2368
posted by Frank Potter at 2:29 AM
0 Comments:
Post a Comment
<< Home