The Parts of Vehicle Tracking Devices
Interestingly, the ability to utilize a complete vehicle tracking system does not require too many hardware components on part of the user. In fact most vehicle tracking systems are comprised of only two sets of hardware devices, the transmitter and the remote receiver. While different communication protocols (GPRS, radio frequency, GPS) may require a different set of hardware components, these components mainly differ in configurations only and the same equipments along with their functions are still left intact.
The Transmitter:
Responsible in sending the signal to be received by the receiver, the transmitter is one of the most important electronic devices of vehicle tracking systems. The signal it emits can come in various forms, depending on its configuration. For cellular-based GPS, small electromagnetic waves are used. If the vehicle is a radio-frequency kind, the type of signal comes in radio waves. Microwaves are used for systems using satellite tracking, like GS.
A transmitter is composed of the following basic parts:
Power supply - The power supply (or power supply unit) is a device or system used to supply electrical energy to the transmitter.
Oscillator - This is the circuit in the transmitter that makes the repetitive signal.
Power supply - It provides electric energy to the transmitter.
Amplifier - It works by intensifying and increasing the signal sent by the transmitter, so the receiver can intercept it better.
Receiver:
The other part of the transmitter, this is a remote device that works by intercepting the signals sent by the transmitter. The primary use of this is to determine the specific location of the transmitter. Receivers can vary, depending on the kind of kind of transmitter used.
There are many other in-depth references such as guide books that tackles deeper topics regarding the transmitter and the receiver electronic devices.
The Transmitter:
Responsible in sending the signal to be received by the receiver, the transmitter is one of the most important electronic devices of vehicle tracking systems. The signal it emits can come in various forms, depending on its configuration. For cellular-based GPS, small electromagnetic waves are used. If the vehicle is a radio-frequency kind, the type of signal comes in radio waves. Microwaves are used for systems using satellite tracking, like GS.
A transmitter is composed of the following basic parts:
Power supply - The power supply (or power supply unit) is a device or system used to supply electrical energy to the transmitter.
Oscillator - This is the circuit in the transmitter that makes the repetitive signal.
Power supply - It provides electric energy to the transmitter.
Amplifier - It works by intensifying and increasing the signal sent by the transmitter, so the receiver can intercept it better.
Receiver:
The other part of the transmitter, this is a remote device that works by intercepting the signals sent by the transmitter. The primary use of this is to determine the specific location of the transmitter. Receivers can vary, depending on the kind of kind of transmitter used.
There are many other in-depth references such as guide books that tackles deeper topics regarding the transmitter and the receiver electronic devices.
About the Author:
Investing in Vehicle Tracking can save your car! Learn the basics of Vehicle Tracking now!
posted by Frank Potter at 10:31 PM
0 Comments:
Post a Comment
<< Home